ESC Steel WIDE U Profile 16BP
The ESC-BP series is a cold formed sheet pile profile. The essential feautres of BP Profiles is the box-clutch interlock and its wide profile. The interlock provides good sealing capabilities.
The advantages of BP sheet piles include:
-
Clutch provides excellent annular area for joint sealing.
-
Interlocking clutches are located at the outer fibre.This results in an optimized section profile for high strength and low material weight.
-
High Moment of Inertia reducing deflection meeting serviceability requirements
-
Wider profile width reduces handling and installation time with usual driving equipment.
-
Wider profile reduces the number of interlocks required for a set wall run length, improving water-tightness capabilities
Product Details
-
Section :
ESC-16BP -
Width :
44.49 in
1130 mm -
Height :
19.06 in
484 mm -
Flange Thickness :
0.305 in
8 mm -
Web Thickness :
in
mm -
Single Pile Weight :
72.36 lbs/ft
107.7 kg/m -
Wall Weight :
19.52 psf
95 kg/m² -
Elastic Section Modulus :
29.76 in³/ft
1600 cm³/m -
Plastic Section Modulus :
in³/ft
cm³/m -
Moment of Inertia :
273.84 in⁴/ft
37395 cm⁴/m -
Cross Sectional Area :
6.05 in²/ft
128 cm²/m -
Coating Area Both Sides :
37.43 ft²/ft
3.48 m²/m -
Coating Area Wall Surface :
ft²/ft²
m²/m²
Bent Corners
- Due to the flexibility of the forming process, the ESC-BP Series Sheet Piles can be formed to almost any corner configuration, without requiring any wastage or welding. Note that the interlocks should be orientated toward the retained side as shown in the following figures.
