ad
HOME Steel Sheet Piling ESC Steel U Profile CRU24-650
prev
e3362d_8aab1a6ecd4d4351bc24ce559d92d6ec~mv2
next
e3362d_8aab1a6ecd4d4351bc24ce559d92d6ec~mv2

ESC Steel U Profile CRU24-650

The ESC-CRU series is a cold rolled sheet pile profile. U-shaped steel sheet piles have long been familiar to designers and constructors because of the long-standing traditions and technologies, and are widely used for permanent structures, temporarily installed soil-retaining construction and temporary cofferdams. ESC-CRU profiles provide an economic alternative to Hot Rolled U Sheet Piles as they are of similar size and possess similar structural properties, with a  section modulus ranging from 500cm3/m all the way up to 4,650cm3/m. With over 50 choices in profile, the CRU series sheet piles allow greater fine tuning in the design for the most economical solution.

Product Details

  • Section :

    ESC-CRU24-650

  • Width :

    25.59 in
    650 mm

  • Height :

    19.69 in
    500 mm

  • Flange Thickness :

    0.472 in
    12 mm

  • Web Thickness :

    in
    mm

  • Single Pile Weight :

    76.60 lbs/ft
    114 kg/m

  • Wall Weight :

    35.92 psf
    175 kg/m²

  • Elastic Section Modulus :

    44.88 in³/ft
    2413 cm³/m

  • Plastic Section Modulus :

    in³/ft
    cm³/m

  • Moment of Inertia :

    441.62 in⁴/ft
    60307 cm⁴/m

  • Cross Sectional Area :

    6.86 in²/ft
    145 cm²/m

  • Coating Area Both Sides :

    26.21 ft²/ft
    2.43 m²/m

  • Coating Area Wall Surface :

    ft²/ft²
    m²/m²

Bent Corners

bent info
  • ESC is able to offer 3 options for Corner Pile configurations in the ESC-CRU Series. Option 1 is frequently used when the installation contractor prefers to create their own corner piles on site depending on the as-driven layout. However this produces wastage on the offcut pile. Option 2 allows welding at the mill or on site and provides the installation contractor with more flexibility on corner pile location. Option 3 provides an option with no welding required and provides increased accuracy at corners that are deviated from the typical 90˚ corner.