ESC Steel U Profile CRU16-400
The ESC-CRU series is a cold rolled sheet pile profile. U-shaped steel sheet piles have long been familiar to designers and constructors because of the long-standing traditions and technologies, and are widely used for permanent structures, temporarily installed soil-retaining construction and temporary cofferdams. ESC-CRU profiles provide an economic alternative to Hot Rolled U Sheet Piles as they are of similar size and possess similar structural properties, with a section modulus ranging from 500cm3/m all the way up to 4,650cm3/m. With over 50 choices in profile, the CRU series sheet piles allow greater fine tuning in the design for the most economical solution.
Product Details
-
Section :
ESC-CRU16-400 -
Width :
15.75 in
400 mm -
Height :
11.42 in
290 mm -
Flange Thickness :
0.453 in
12 mm -
Web Thickness :
in
mm -
Single Pile Weight :
43.01 lbs/ft
64 kg/m -
Wall Weight :
32.77 psf
160 kg/m² -
Elastic Section Modulus :
29.11 in³/ft
1565 cm³/m -
Plastic Section Modulus :
in³/ft
cm³/m -
Moment of Inertia :
166.11 in⁴/ft
22684 cm⁴/m -
Cross Sectional Area :
9.63 in²/ft
204 cm²/m -
Coating Area Both Sides :
15.32 ft²/ft
1.42 m²/m -
Coating Area Wall Surface :
ft²/ft²
m²/m²
Bent Corners
- ESC is able to offer 3 options for Corner Pile configurations in the ESC-CRU Series. Option 1 is frequently used when the installation contractor prefers to create their own corner piles on site depending on the as-driven layout. However this produces wastage on the offcut pile. Option 2 allows welding at the mill or on site and provides the installation contractor with more flexibility on corner pile location. Option 3 provides an option with no welding required and provides increased accuracy at corners that are deviated from the typical 90˚ corner.
